Sources & Assumptions

How We Calculate

Every result on YardCraft comes from a formula you can see on the calculator page. This page explains where our constants come from, what we assume, and how we check the math. Results are planning estimates, not engineering advice.

1. Reference Sources

These are the main references behind our constants and default recommendations:

  • Manufacturer bag labels and data sheets (for example Quikrete and Sakrete concrete mixes, which are sold under ASTM C387): stated yield per bag.
  • ACI 302.1R (American Concrete Institute guide to floor and slab construction): general guidance on slab thickness, control joints, and sub-base. We use it for default suggestions, not as a design method.
  • USDA Plant Hardiness Zone Map: 2023 update for garden planting schedules, frost risk windows, and climate zone boundaries.
  • NOAA Climate Normals (1991–2020): Average last spring freeze and first fall frost dates by municipal weather stations.

2. Standard Bag Yield Constants

Major brands print an approximate yield on each bag of dry concrete mix. These are the values our concrete calculators use; if your product label states a different yield, the result will differ in proportion.

Bag WeightCubic Foot YieldCubic Meter YieldBags per Cubic Yard
80 lb bag0.60 cu ft0.0170 m³45 bags
60 lb bag0.45 cu ft0.0127 m³60 bags
50 lb bag0.375 cu ft0.0106 m³72 bags
40 lb bag0.30 cu ft0.0085 m³90 bags

3. How We Check the Math

Each calculator has its own automated test file (more than 270 test cases across the site) that compares the code's output with worked examples calculated by hand, including edge cases such as zero or very large inputs. We run the full test suite before publishing any change to a calculator.

4. Assumptions You Should Know

  • Waste allowance: most calculators add 5–10% by default for cuts, spillage, and uneven ground. You can set it to 0% to see the exact theoretical quantity.
  • Rounding: bag, sheet, and board counts are always rounded up, because stores do not sell partial bags.
  • Costs: prices are rough U.S. national ranges for budgeting. They are our estimates based on typical retail prices, not survey data, and local prices can differ by 30% or more.
  • Structural work: nothing here replaces a permit review, an engineer's design, or local code requirements.

5. Corrections & Error Reporting

We are committed to continuous accuracy. If you notice any mathematical discrepancy, regional product divergence, or outdated material pricing, please email us at contact@yardcraftcalc.com.